Numer produktu: 51095
GTIN/EAN: 4250390874903
8,49 €
Über 30 lieferbar.
Natychmiast dostępny, czas dostawy 2 - 3 days(1)
• Sediment filter
• Diameter 60mm
• Fineness 5µ
• Wall mount bracket included
• With 10 inches (254mm) filter cartridges
Informacje dot. produktu "Naturewater NW-BR10B1 1 filtr stopniowy 20,67 mm 1/2" 60 mm PP kartusz klamra klucz płaski"
NW-BR10B1
water filter has been especially designed to make use of drinking water which is slightly polluted by quick and easy means. The water filter is inexpensive and easy to assemble and handle.As for quality and filter performance, it corresponds to those equipments that are offered considerably more expensive on the market.
The water filter is, depending on the used filter inserts, the best solution for almost all water impurities.
The offered water filter system is supplied with a 5µ sediment filter insert that removes reliably sand, rust, algae and other floating particles from the water.
Of course, the water filter insert 1/2 inch (20.67 mm) can be replaced and according to the requirement be replaced by another material.
A complete list of the suitable filter inserts are found in the in the technical data. Sediment filters are not washable and therefore must be replaced after 6 months respectively (DIN 1988)).
The water filter has neither a RO-Membrane (reverse osmosis) nor an ion exchanger.
This means the natural mineral content (which is vital to life) is to a large extent maintained and the water hardness is hardly affected.
Sediment filtration 5µ
Sediment particles like sand, algae and rust are removed.
Eigenschaften
Anschlüsse: | 1/2 Zoll |
---|---|
Ciśnienie robocze: | 5.5 Bar |
Dokładny typ produktu: | filtr osadu |
Druck: | 8.9 bar |
Gehäusegröße / passend für: | 10" (254 mm) / Ø 62mm |
Główny materiał: | polipropylen (PP) |
Ilość stopni filtracji: | 1-stopniowy |
Kolor: | niebieski |
Maks. ciśnienie (bar): | 9 Bar |
Maks. temperatura: | 42 °C |
Min. temperatura: | 4 °C |
Modell: | NW-BR10B1 |
Przepuszczalność filtra: | 5 µm |
Przepływ (l/h): | 360 LITER |
Przyłącze węża: | 2 x mosiądz GW 20,67 mm (½") |
Rodzaj produktu: | filtr wody |
Rozmiar wkładu filtrującego: | 10" (254 mm) |
Stopień filtracji 1: | [50820] Naturewater 10" - 254mm 5µ filtr osadu PP |
Technika filtracji: | polipropylen |
Typ montażu: | montaż naścienny, podblatowy |
Usuwanie zanieczyszczeń: | azbest, cząstki wapnia, osady |
Wymagana bateria: | Nie |
Wymiary: | 130 x 140 x 340 mm |
Zawartość przesyłki: | Naturewater Klucz filtra pierścienia PP duży, [artykuł 50820] Naturewater 10"- 254 mm 5µ wkład filtra osadu PP, zestaw montażowy |
Instrukcje bezpieczeństwa
Ogólne wskazówki
- Filtr do wody należy używać wyłącznie do uzdatniania wody pitnej zgodnie ze specyfikacjami technicznymi. Nie nadaje się do filtrowania cieczy zanieczyszczonych chemicznie.
- Nie przekraczać maksymalnego dopuszczalnego ciśnienia wody. W razie potrzeby użyj reduktora ciśnienia.
- Wymieniaj elementy filtrujące zgodnie z instrukcjami producenta, aby zapewnić odpowiednią jakość wody i zapobiec zatykaniu.
- System należy regularnie czyścić i dezynfekować zgodnie z instrukcjami zawartymi w instrukcji obsługi.
- Chronić system przed mrozem, ponieważ zamarznięta woda może uszkodzić komponenty.
Producent
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- DE
- service@wiltec.info