Item no.: 64410
GTIN/EAN: 4251548157138
€94.89
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• 5-stage reverse-osmosis system
• LED filter change indicator
• Useful tank
• T33 cartridge
• 300 L per day
Product information "Naturewater NW-5-80RODT 5-stage Reverse Osmosis 300 l/min with Display"
The Naturewater NW-5-80RODT device is a 5-stage reverse osmosis system that can transform tap water into clean and delicious drinking water. This machine brings out the best in your tap water, as it removes up to 99 % of noxious substances such as heavy metals, bacteria, viruses, chlorine, fluoride, and nitrate. The water comes out with an optimal pH and a good taste. You will save money and contribute to ecology by doing without plastic bottles.
The Naturewater NW-5-80RODT device has five stages during which the water is treated:
• The first stage is a sediment filter; it filters coarse particles such as sand, rust, or mud from the water.
• The second stage is an activated-carbon granulate filter; it removes organic contaminations, chlorines, and smells from the water.
• The third stage is an activated-carbon filter block; it removes remaining organic contaminations, chlorines, and smells from the water.
• The fourth stage includes an 80-G reverse-osmosis membrane; it filters finest noxious substances from the water and only lets pass clean water.
• The fifth stage is an activated-carbon afterfilter; it cleans the water once again and makes for a good taste.
The useful below-table device is equipped with an LED display that allows controlling the device. This display indicates the filter status, can reset the filter status after a filter change, and controls the flushing feature of the filter.
The Naturewater NW-5-80RODT device is very user-friendly, too. The device is directly connected to the cold-water line, and the water can be supplied via a separate water cock. The supplied tank makes for a permanent and quick availability of water. The waste water-pure water ratio is 1:3.
With this device, the danger of leakage is, in comparison to other devices, nearly excluded, as the innovative water circuit is directly integrated into the system and does without connections and hoses that might go off.
The Naturewater NW-5-80RODT device has five stages during which the water is treated:
• The first stage is a sediment filter; it filters coarse particles such as sand, rust, or mud from the water.
• The second stage is an activated-carbon granulate filter; it removes organic contaminations, chlorines, and smells from the water.
• The third stage is an activated-carbon filter block; it removes remaining organic contaminations, chlorines, and smells from the water.
• The fourth stage includes an 80-G reverse-osmosis membrane; it filters finest noxious substances from the water and only lets pass clean water.
• The fifth stage is an activated-carbon afterfilter; it cleans the water once again and makes for a good taste.
The useful below-table device is equipped with an LED display that allows controlling the device. This display indicates the filter status, can reset the filter status after a filter change, and controls the flushing feature of the filter.
The Naturewater NW-5-80RODT device is very user-friendly, too. The device is directly connected to the cold-water line, and the water can be supplied via a separate water cock. The supplied tank makes for a permanent and quick availability of water. The waste water-pure water ratio is 1:3.
With this device, the danger of leakage is, in comparison to other devices, nearly excluded, as the innovative water circuit is directly integrated into the system and does without connections and hoses that might go off.
Properties
Colour: | white |
---|---|
Contaminant removal: | asbestos, bacteria, chlorine, chlorine taste and odour, copper, lead, lime particles, sediments |
Dimensions: | 390 x 190 x 435 mm |
Filter permeability: | 0.0001 µm |
Filter stage 1: | [64449] Naturewater PP-10 5µ 10 Inch – 254mm PP Sediment Filter Cartridge |
Filter stage 2: | [64450] Naturewater GAC-10 10 Inch – 254mm Activated Carbon Granulate Osmosis Filter |
Filter stage 3: | [64451] Naturewater CTO-10 – 5µ 10 Inch – 254mm Activated Carbon Block Filter |
Filter stage 4: | [64453] Naturewater RO80G – 80GPD Reverse Osmosis Membrane 300 l/day |
Filter stage 5: | [64455] Naturewater T-33 – Inline Activated Carbon Block Reverse Osmosis Filter |
Filtration method: | CTO, carbon, coconut carbon, polypropylene (PP), reverse osmosis, sediment |
Installation type: | undertable mounting |
Max. pressure (bar): | 7 Bar |
Max. temperature: | 38 °C |
Min. temperature: | 4 °C |
Number of filter stages: | 5 stages |
Precise product type: | reverse osmosis |
Product type: | water filter |
Tank volume (l): | 11.3 Liter |
Working pressure: | 4 Bar |
Safety Instructions
Safety Information
Only use osmosis systems to treat drinking water in accordance with the technical specifications. Not suitable for filtering chemically contaminated liquids.
Do not exceed the maximum water pressure. If necessary, use a pressure reducer.
Change the filter parts in accordance with the manufacturer's instructions to ensure the water quality and prevent blockages.
Regularly clean and disinfect the osmosis system as stated in the instructions in the manual.
Protect your osmosis system from frost, as frozen water can damage the components.
Risk of Electric Shock
Never lift, transport or attach the appliance by the power cable.
Ensure that all cables and connections are undamaged, securely fastened and watertight.
Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
Manufacturer
WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- DE
service@wiltec.info