Item no.: 50811
GTIN/EAN: 4250390835997
€26.99
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• 50 GPD (190 l/day)
• Increased pure water winning
• Rubber feet for reduction of vibrations and noise
• With pressure adjusting screw (factory-set)
Product information "Naturewater Booster Pump with 50 GPD Flow Rate to Adjust Water Pressure of Reverse Osmosis Systems"
Booster pumps or high pressure pumps are the ideal supplement for reverse osmosis systems, if the existing water pressure for operating the system is not sufficient or if you want to increase the high-purity water. The rubber bumpers dampen the running noises and vibrations generated by the pump.
A diaphragm booster pump integrated in the reversed osmosis system increases the pressure within the system and enhances significantly the water quality and quantity. The water gain is enlarged due to the high pressure.
Our booster pumps are equipped with an adjusting screw to adjust the water pressure. All pumps are tested and factory-set. Please do not change the settings, since this could have an negatice impact on the pumping performance.
The delivery does not include the mains adapter (separately available).
A diaphragm booster pump integrated in the reversed osmosis system increases the pressure within the system and enhances significantly the water quality and quantity. The water gain is enlarged due to the high pressure.
Our booster pumps are equipped with an adjusting screw to adjust the water pressure. All pumps are tested and factory-set. Please do not change the settings, since this could have an negatice impact on the pumping performance.
The delivery does not include the mains adapter (separately available).
Properties
Anschlüsse: | 2x 16,41 mm (3/8") |
---|---|
Battery required: | No |
Cable length (m): | 0.275 Meter |
Connection size: | 2 x 16.41 mm (3/8") female thread |
Dimensions: | 83 x 220 x 100 mm |
Druck: | Eingangsdruck 2 bar Ausgangdruck 5 bar |
Engine power: | 24 W |
Flow rate (l/h): | 36 LITER |
IP code: | IPX4 |
Input power: | 24 Watt |
Input voltage: | DC 24 V |
Leistungsaufnahme: | 24 W |
Main material: | metal |
Mains adaptor included: | No |
Max. pressure (bar): | 5 Bar |
Max. temperature: | 38 °C |
Max. working power: | 1 Ampere |
Min. temperature: | 5 °C |
Precise product type: | booster pump |
Product type: | water filter |
Pumpenanschluss Ø / Zoll: | 2 x 3/8" (16.41 mm) |
Sound level (dB (A)): | 40 db(A) |
Safety Instructions
Safety Information
The water booster pump is intended only for increasing the water pressure in authorised water systems. It is not suitable for use with harsh or explosive liquids.
Do not exceed the maximum operating pressure of the pump and the connected system.
nstall the pump in a well-ventilated place to avoid overheating.
Check and maintain the pump regularly for leaks, wear and tear.
Never operate the pump without a sufficient water supply, as this can lead to damage.
Protect the pump from frost to prevent damage to the pump and pipes.
Risk of Electric Shock
Never lift, transport or attach the appliance by the power cable.
Ensure that all cables and connections are undamaged, securely fastened and watertight.
Before initial operation, ensure that the mains voltage matches the rated voltage on the rating plate.
Manufacturer
WilTec Wildanger Technik GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@wiltec.info