Item no.: 51090
GTIN/EAN: 4250390874859
€12.49
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Sediment filter
• Diameter 60 mm
• Fineness 5 µ
• Wall mount bracket included
• With 254 mm (10") filter cartridge
Product information "Naturewater NW-BR10A 1-stage filter 26.16 mm (3/4") PP cartridge, bracket, and wrench"
NW-BR10A water filter has been especially designed to make use of drinking water which is slightly polluted by quick and easy means. The water filter is inexpensive and easy to assemble and handle.
As for quality and filter performance,it corresponds to those equipments that are offered considerably more expensive on the market.
The water filter is, depending on the used filter inserts, the best solution for almost all water impurities.
The offered water filter system is supplied with a 5 µ sediment filter insert that removes reliably sand, rust, algae and other floating particles from the water.
Of course, the water filter insert 26.16 mm (3/4") can be replaced and according to the requirement be replaced by another material.
A complete list of the suitable filter inserts are found in the in the technical data. Sediment filters are not washable and therefore must be replaced after 6 months respectively (DIN 1988)).
The water filter has neither a RO-Membrane (reverse osmosis) nor an ion exchanger.
This means the natural mineral content (which is vital to life) is to a large extent maintained and the water hardness is hardly affected.
Sediment filtration 5 µ
Sediment particles like sand, algae and rust are removed.
As for quality and filter performance,it corresponds to those equipments that are offered considerably more expensive on the market.
The water filter is, depending on the used filter inserts, the best solution for almost all water impurities.
The offered water filter system is supplied with a 5 µ sediment filter insert that removes reliably sand, rust, algae and other floating particles from the water.
Of course, the water filter insert 26.16 mm (3/4") can be replaced and according to the requirement be replaced by another material.
A complete list of the suitable filter inserts are found in the in the technical data. Sediment filters are not washable and therefore must be replaced after 6 months respectively (DIN 1988)).
The water filter has neither a RO-Membrane (reverse osmosis) nor an ion exchanger.
This means the natural mineral content (which is vital to life) is to a large extent maintained and the water hardness is hardly affected.
Sediment filtration 5 µ
Sediment particles like sand, algae and rust are removed.
Properties
Anschlüsse: | 26,16 mm (3/4") |
---|---|
Battery required: | No |
Colour: | blue |
Contaminant removal: | asbestos, lime particles, sediments |
Dimensions: | 130 x 140 x 340 mm |
Druck: | 8,6 bar |
Filter insert size: | 10" (254 mm) |
Filter permeability: | 5 µm |
Filter stage 1: | [50820] Naturewater 10Inch - 254mm 5µ Sediment Filter PP |
Filtration method: | polypropylene (PP) |
Flow rate (l/h): | 360 LITER |
Gehäusegröße / passend für: | 10" (254 mm) / Ø 62mm |
Hose connection: | 2x 26.16 mm (3/4") brass female thread |
Installation type: | undertable mounting, wall mounting |
Main material: | polypropylene (PP), polyethylene terephthalate (PET) |
Max. pressure (bar): | 9 Bar |
Max. temperature: | 42 °C |
Min. temperature: | 4 °C |
Modell: | NW-BR10A |
Number of filter stages: | 1 stages |
Precise product type: | sediment filter |
Product type: | water filter |
Scope of delivery: | Naturewater Large PP Filter Key (ring-shaped), [item 50820] Naturewater 10 Inch - 254 mm 5 µ Sediment Filter PP, mounting kit |
Working pressure: | 5.5 Bar |
Downloads
Manual for Naturewater NW-BR10A 1-stage filter 26.16 mm (3/4") PP cartridge, bracket, and wrench Safety Instructions
Safety Information
- Only use water filters to treat drinking water in accordance with the specifications. Not suitable for filtering chemically contaminated liquids.
- Do not exceed the maximum water pressure. If necessary, use a pressure reducer.
- Change the filter parts in accordance with the manufacturer's instructions to ensure the water quality and prevent blockages.
- Regularly clean and disinfect the osmosis system as stated in the instructions in the manual.
- Protect your osmosis system from frost, as frozen water can damage the components.
Manufacturer
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- DE
- service@wiltec.info