Item no.: 64420
GTIN/EAN: 4251548157237
€18.49
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• 2-stage below-table filter
• Quick-change system
• Simple wall fastening
• 10″ PP sediment and activated-carbon block cartridge
• ¼″ quick connector
Product information "Naturewater NW-2-PPCTO Below-table PP Sediment and Acticated-carbon Block"
This Naturewater NW-2-PPCTO device is a 2-stage below-table water filter, which can be equipped with different filter cartridges. This model can be simply fastened to the wall with the help of the adaptor plate included. The ¼″ quick connectors of the inlet and outlet allow the user a quick and comfortable connection.
The Naturewater NW-2-PPCTO goes without an electrical connection; that is why it can be connected to nearly every water supply in a simple and comfortable way.
The 2-stage water filter is equipped with a PP sediment and an activated-carbon cartridge as a standard. If required, it can be used with any other suitable cartridge. This system has neither an RO diaphragm (reverse osmosis), nor an ion exchanger. This means that the content of vital natural minerals is largely conserved and there is only a little influence on water hardness.
The filter change is done in a few seconds thanks to the innovating quick-change system.
The Naturewater NW-2-PPCTO goes without an electrical connection; that is why it can be connected to nearly every water supply in a simple and comfortable way.
The 2-stage water filter is equipped with a PP sediment and an activated-carbon cartridge as a standard. If required, it can be used with any other suitable cartridge. This system has neither an RO diaphragm (reverse osmosis), nor an ion exchanger. This means that the content of vital natural minerals is largely conserved and there is only a little influence on water hardness.
The filter change is done in a few seconds thanks to the innovating quick-change system.
Properties
Battery required: | No |
---|---|
Colour: | white |
Contaminant removal: | chlorine, chlorine taste and odour, lime particles, sediments |
Dimensions: | 200 x 100 x 345 mm |
Filter stage 1: | [64456] Naturewater PP-10F 5µ PP-Sedimentfilter Filterkartusche Ersatzfilter |
Filter stage 2: | Naturewater CTO-10CF Active-coal Water Filter Spare Osmosis Cartridge |
Filtration method: | CTO, polypropylene (PP), sediment |
Flow rate (l/h): | 210 Liter |
Main material: | polypropylene (PP) |
Max. pressure (bar): | 10 Bar |
Max. temperature: | 38 °C |
Min. temperature: | 5 °C |
Number of filter stages: | 2 stages |
Precise product type: | 2-stage water filter |
Product type: | water filter |
Working pressure: | 4 Bar |
Safety Instructions
Safety Information
- Only use water filters to treat drinking water in accordance with the specifications. Not suitable for filtering chemically contaminated liquids.
- Do not exceed the maximum water pressure. If necessary, use a pressure reducer.
- Change the filter parts in accordance with the manufacturer's instructions to ensure the water quality and prevent blockages.
- Regularly clean and disinfect the osmosis system as stated in the instructions in the manual.
- Protect your osmosis system from frost, as frozen water can damage the components.
Manufacturer
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- DE
- service@wiltec.info