Item no.: 51086
GTIN/EAN: 4250390874811
€8.49
More than 30 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Sediment filter
• Diameter 60mm
• Fineness 5µ
• Wall mount bracket included
• With 10 inches (254mm) filter cartridges
Product information "Naturewater NW-BR5B 1-stage filter 1/2 inch (20.67mm) 60mm PP cartridge, bracket and wrench"
NW-BR5B
water filter has been especially designed to make use of drinking water which is slightly polluted by quick and easy means. The water filter is inexpensive and easy to assemble and handle.As for quality and filter performance,it corresponds to those equipments that are offered considerably more expensive on the market.
The water filter is, depending on the used filter inserts, the best solution for almost all water impurities.
The offered water filter system is supplied with a 5µ sediment filter insert that removes reliably sand, rust, algae and other floating particles from the water.
Of course, the water filter insert 1/2 inch (20.67mm) can be replaced and according to the requirement be replaced by another material.
The water filter has neither a RO-Membrane (reverse osmosis) nor an ion exchanger.
This means the natural mineral content (which is vital to life) is to a large extent maintained and the water hardness is hardly affected.
Sediment filtration 5µ
Sediment particles like sand, algae and rust are removed.
Please be aware that sediment filters are not washable and must be changed approx. every 6 months.
You can find the matching water filter insert for this product under item number 50820. (Please note that this must be split in the middle to fit).
Properties
Anschlüsse: | 1/2 Zoll |
---|---|
Battery required: | No |
Colour: | blue |
Contaminant removal: | asbestos, lime particles, sediments |
Dimensions: | 130 x 150 x 220 mm |
Druck: | 8.6 bar |
Filter insert size: | 5" (127 mm) |
Filter permeability: | 5 µm |
Filter stage 1: | Naturewater PP Cartridge 127 mm (5 Inch) |
Filtration method: | polypropylene (PP) |
Flow rate (l/h): | 300 LITER |
Hose connection: | 2x 20.67 mm (1/2") brass female thread |
Installation type: | undertable mounting, wall mounting |
Main material: | polypropylene (PP), polyethylene terephthalate (PET) |
Max. pressure (bar): | 9 Bar |
Max. temperature: | 42 °C |
Min. temperature: | 4 °C |
Modell: | NW-BR5B |
Number of filter stages: | 1 stages |
Precise product type: | sediment filter |
Product type: | water filter |
Scope of delivery: | Naturewater Large PP Filter Key (ring-shaped), Naturewater PP Cartridge 127 mm (5 Inch), mounting kit |
Working pressure: | 5.5 Bar |
Safety Instructions
Safety Information
- Only use water filters to treat drinking water in accordance with the specifications. Not suitable for filtering chemically contaminated liquids.
- Do not exceed the maximum water pressure. If necessary, use a pressure reducer.
- Change the filter parts in accordance with the manufacturer's instructions to ensure the water quality and prevent blockages.
- Regularly clean and disinfect the osmosis system as stated in the instructions in the manual.
- Protect your osmosis system from frost, as frozen water can damage the components.
Manufacturer
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- DE
- service@wiltec.info