Skip to main content Skip to search Skip to main navigation

Naturewater NW-BR10B2 double filter 1 inch (32.89mm) PP cartridge, active carbon block, wrench

Product information "Naturewater NW-BR10B2 double filter 1 inch (32.89mm) PP cartridge, active carbon block, wrench"

Naturewater NW-BR10B2

double filter 32.89 mm 1 inch sediment filter

Our double water filter are equipped with a 10 inches 5µ sediment fine filter and a 10 inches 5 micron activated carbon block filter that generate extremely pure water.

The water filter is inexpensive, easy to install and handle.
Its quality and capacity corresponds to systems that are far more expensive.

The filtering sytem is a perfect solution for almost all water impurities depending on the use of filter inserts.
The filter system offered here is supplied with a 5µ sediment filter and a 5 microns activated carbon block filter insert that remove reliably sand, rust, algae, and other floating particles from the water.

The filter inserts 10 inches (254 mm) can be replaced and according to the requirements by replaced by another material.

A complete list of the suitable filter inserts are found in the technical data.

The water filter has no RO-Membrane (reverse osmosis) and no ion exchangers either. This means the natural mineral content (which is vital to life) is largely maintained and the water hardness is hardly affected.

Sediment filtration 5µ
Sediment particles like sand, algae and rust are removed.
Properties
Anschlüsse: 1 Zoll
Battery required: No
Colour: blue
Contaminant removal: asbestos, chlorine taste and odour, lime particles, sediments
Dimensions: 280 x 150 x 355 mm
Druck: 8.9 bar
Filter insert size: 10" (254 mm)
Filter permeability: 5 µm
Filter stage 1: [50820] Naturewater 10Inch - 254mm 5µ Sediment Filter PP
Filter stage 2: [50825] Naturewater 10 Inch - 254mm 5µ Activated Carbon Block Filter Insert CTO-10B
Filtration method: CTO, carbon, coconut carbon, polypropylene (PP), sediment
Flow rate (l/h): 360 LITER
Gehäusegröße / passend für: 10" (254 mm) / Ø 62mm
Hose connection: 2x 32.89 mm (1") brass female thread
Installation type: undertable mounting, wall mounting
Main material: polypropylene (PP)
Max. pressure (bar): 9 Bar
Max. temperature: 42 °C
Min. temperature: 4 °C
Modell: NW-BR10B2
Number of filter stages: 2 stages
Precise product type: double filter
Product type: water filter
Scope of delivery: Naturewater Large PP Filter Key (ring-shaped), [item 50820] Naturewater 10 Inch - 254 mm 5 µ Sediment Filter PP, [item 50825] Naturewater 10 Inch - 254 mm 5 µ Activated Carbon Block Filter Insert CTO-10B, mounting kit
Working pressure: 5.5 Bar
Safety Instructions

Safety Information

  • Feature Only use water filters to treat drinking water in accordance with the specifications. Not suitable for filtering chemically contaminated liquids.
  • Feature Do not exceed the maximum water pressure. If necessary, use a pressure reducer.
  • Feature Change the filter parts in accordance with the manufacturer's instructions to ensure the water quality and prevent blockages.
  • Feature Regularly clean and disinfect the osmosis system as stated in the instructions in the manual.
  • Feature Protect your osmosis system from frost, as frozen water can damage the components.
Manufacturer
  • manufacture location WilTec Wildanger Technik GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@wiltec.info