Item no.: 51107
GTIN/EAN: 4250390875023
€29.99
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Sediment filter
• Block carbon filter
• Diameter 60 mm
• Fineness 5 µ
• Wall mount bracket included
• With 10 inches (254 mm) filter cartridges
Product information "Naturewater NW-PR302 double filter sediment filter and active carbon block, faucet, 2.5m pipe"
Naturewater NW-PR302
double filter with sediment filter and activated carbon blockOur double water filter are equipped with a 10 inches 5 µ sediment fine filter and a 10 inches 5 microns activated carbon block filter which generate extremely pure water.
The water filter is inexpensive and easy to mount and handle.
Its quality and capacity corresponds to those systems which are sold at a higher price.
The filtering system is a perfect solution for almost all water impurities depending on the use of filter inserts.
The filter system offered here is supplied with a 5 µ Sediment filter and a 5 microns activated carbon block filter insert that and remove reliably sand, rust, algae, and other floating particles from the water.
The applied filter inserts 10 inches (254 mm) can be replaced and upon demand be replaced by another material.
A complete list of suitable water filter inserts are found in the technical data.
The unit has no RO-Membrane (reverse osmosis) and also no ion exchangers. This means the natural mineral content (which is vital to life) is largely maintained and the water hardness is hardly affected.
Sediment filtration 5 µ
Sediment particles like sand, algae and rust are removed.
Properties
Anschlüsse: | 1/4 Zoll |
---|---|
Battery required: | No |
Colour: | white |
Contaminant removal: | asbestos, chlorine taste and odour, lime particles, sediments |
Dimensions: | 275 x 130 x 345 mm |
Druck: | 10.3 bar |
Filter insert size: | 10" (254 mm) |
Filter permeability: | 5 µm |
Filter stage 1: | [50820] Naturewater 10Inch - 254mm 5µ Sediment Filter PP |
Filter stage 2: | [50825] Naturewater 10 Inch - 254mm 5µ Activated Carbon Block Filter Insert CTO-10B |
Filtration method: | CTO, carbon, coconut carbon, polypropylene (PP), sediment |
Flow rate (l/h): | 360 LITER |
Hose connection: | Jaco |
Hose length: | 3 Meter |
Hose material: | polyethylene (PE) |
Inner hose diameter: | 3.65 mm (0.142″) |
Installation type: | undertable mounting, wall mounting |
Main material: | polypropylene (PP) |
Max. pressure (bar): | 9 Bar |
Max. temperature: | 42 °C |
Min. temperature: | 4 °C |
Modell: | NW-PR302 |
Number of filter stages: | 2 stages |
Outer hose diameter: | 6.35 mm (1/4") |
Precise product type: | double filter |
Product type: | water filter |
Scope of delivery: | 1 roll of Teflon tape, 3m [item 50864] Naturewater PE Hose 6.35 mm (1/4 inch), Naturewater Large PP Filter Key (ring-shaped), [Item 50807] Naturewater Ball Valve with Jaco Fitting 6.35 mm (1/4"), [Item 50865] Naturewater Water Tap D-01, [item 50806] Naturewater Water Tap Adapter for Angle Valve with O-Ring, [item 50820] Naturewater 10 Inch - 254 mm 5 µ Sediment Filter PP, [item 50825] Naturewater 10 Inch - 254 mm 5 µ Activated Carbon Block Filter Insert CTO-10B, mounting kit |
Working pressure: | 5.5 Bar |
Safety Instructions
Safety Information
Only use water filters to treat drinking water in accordance with the specifications. Not suitable for filtering chemically contaminated liquids.
Do not exceed the maximum water pressure. If necessary, use a pressure reducer.
Change the filter parts in accordance with the manufacturer's instructions to ensure the water quality and prevent blockages.
Regularly clean and disinfect the osmosis system as stated in the instructions in the manual.
Protect your osmosis system from frost, as frozen water can damage the components.
Manufacturer
WilTec Wildanger Technik GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@wiltec.info